|
Features:
IF frequency band pass
Solid state switch elements
Blocking
RS-232C and IEEE-488 interfaces
Crosspoint verification
Front panel keypad control
& LCD display
Recalls 20 configurations
Rugged modular construction
Redundant Power Supplies
Redundant A.C. Line Power Input
Design Considerations:
This unit was designed to provide extremely high open circuit isolation
and low interchannel crosstalk. This was accomplished by careful selection
of the switch elements used, by separating the subsections into shielded
cavities, using switched grounding techniques and solid overall shielding
and high conductive grounding.
12807A Front Panel
12807A Rear Panel
|
Specifications:
- Matrix size - Quad 10 Inputs x 10 Outputs
- Matrix type - Blocking
- Frequency range - 3MHz to 150MHz (-3dB)
- Gain - +3.5dB (nominal)
- Impedance - 50 Ohms (nominal)
- Open circuit isolation - >80dB @70MHz (typ.)
- Crosstalk isolation - >80dB @ 70MHz (typ.)
- Input VSWR - <1.5:1 (typical)
- Contact type - Solid state
- Signal connectors - BNC female
- Remote control - RS-232C or IEEE-488 (GPIB)
- Local control Keypad/LCD display
- Control connector - DB-25P
- Mating connector - DB-25S (supplied)
- Interface type - DTE configured
- AC power - 85-265VAC, 47-63Hz, 75W
- Power redundancy - AC, DC
- Operating temp - 0°C to +70°C
- Storage temp - -20°C to +75°C
- Humidity - 90% max (non-condensing)
- Front panel color - semi-gloss gray
- Weight - 65 lbs.
- Size - 5.25"H x 19.00"W x 25.00"D
- Mounting - Chassis Trak® CT-S-1-24
Options: (contact factory)
- Special front panel color
- Other configurations
|
